Hi all
I'm very sorry my second post is a problem but I really need help as my Pleo (1.1) is not responding as it did...
To give you the context, I bought this used Pleo 5 days ago on Ebay.fr.... The 2 first days was very fine and the beast was growing normally... So the Hacth then the infant and the juvenile steps were ok...
I also tryed the Ugobe personnalities and all worked fine...
The third day began troubles... I plug the fully charged battery, put the switch on and nothing happened
First I recharge the battery than plug it in again -> same no reactions
This is where I tryed to give life back to my Pleo.
1 - First I Tryed to reflash (1.1) it (windows style) -> impossible -> 1.1 is already in the memory, installer refuse to do the job
2 - I Tryed to insert an SD card with a personnality in -> pleo began the animation but freeze at about 10 second -> cool, it is not dead
3 - I Tryed to flash it (1.1) with the SDcard -> freeze at the 4th chime
It worked again !
1 - Strangely, I could (dunno how it changed) reflash the Pleo to 1.1 (windows style).
2 - The process worked fine and the Pleo gets out from hell
3 - Let it work alone for 30 minutes, no problem, it seems to be reborn for hours of fun
And dead again :
1 - As I replugged the battey I fully charge -> same as before -> pleo don't move
2 - Insert and SD with personnality -> do the whole job now
3 - Reboot without SD -> no life !
So I installed Dino-Mite (1.0.2) to get some more information :
1 - Windows and Dino-mite recognise the Pleo
2 - I can read the internal memory or the sd card
3 - I can copy files from the internal memory to SDcard and the other way too
4 - I can move all Joints manualy and I can reset the pleo to the box position
5 - I CAN'T delete files from the internal memory (expected to erase all file to apply the 1.1 update and to delete the camera and audio files I put in with Dino)
6 - The battery is ok so the charge works
7 - The SDinstaller (1.1) log is ok and won't flash as it recognize the 1.1 system and don't wan't to reflash
8 - Camera is ok as I can see my keyboard as the Pleo shoots it
Now :
1 - The 1.1 windows installer don't work (1.1 already installed)
2 - The 1.0.2 windows installer don't want to install on windows, a box ask me to have a windows with SP2 or higher -> I'm on SP3, neither the SD installer
3 - Personnalities freeze again (exemple : hollidays -> pleo moves, says HoHoHo and then freezes again
Of course you can undertand how sad I can be... I really love robots and it's my first who can simulates life (robosapien are funny but...), hope someone could help me
-> I send a message to Ugobe and to the guy who solds me the Pleo
-> I uploaded my Pleo config to give you same info I have
Thanks for your help
config
Pleo Hardware Configuration:
Hardware ID: 07040F05-002A1F27-01002607-FFFFDCFF (05002ADC)
Serial Number: 110400099650
Board Revision: 17-8
Board Revision ADC: 525
Build Configuration:
Firmware built for: Pleo
Build type: RELEASE
Pleo main ARM version: 8128 - Mar 19 2008 06:24:52
Pleo head ARM version: 8128 - Mar 19 2008 06:25:46
Pleo PM (DF) version: 8139 - Mar 24 2008 20:32:32
Bootloader version: 7361 - Nov 15 2007 21:34:31
Compiled in: Thumb mode
Resource folders: on
MotorController Configuration:
MotorController 0: Version 28
MotorController 1: Version 28
MotorController 2: Version 28
MotorController 3: Version 28
VM Configuration:
Incremental mode: off
Code swapping: false
malloc mode: false
main vm image: 4096
sensors vm image: 3072
auxiliary vm image: 2560
user vm image: 2048