Print

[mixan]

Hello everyone!

I have read trough this forum and others but cant find the solution on my own.

First I thought about the battery problem but
when I installed dino-mite  i get connection there and my batterys (got 2) seems fine

Today I bought a transcend 2gb sd card (formatted to fat32) but pleo cant find it in dinomite and nothing happends when I turn him on with the sd card with downgrade patch on

Could it be that i need another sd card or is there som serious troble with my pleo?

when I try the windows xp upgrade it says i got 1.1 installed

these are my stats in dino-mite


<=== SENDING COMMAND ===>
stats power
                  Battery Voltage = 79, Min 79, Max 79 (tenths of a volt)
              Battery Temperature = 25, Min 25, Max 25 (degrees C)
                  Battery Current = 250, Min 243, Max 257 (milliamperes)
             Battery sensor value = 87 (% capacity remaining)
      Battery sensor direct value = 87, Min 0, Max 87
              Battery Voltage A/D = 698, Min 695, Max 699
          Battery Temperature A/D = 320, Min 320, Max 320
              Battery Current A/D = 35, Min 34, Max 36
            Thermistor Resistance = 10195, Min 10189, Max 10198 (ohms)
      Battery Internal Resistance = 0, Min 100000, Max 0 (milliohms)
        Battery Capacity Consumed = 2 (mAh)
                       Powered up = true
                  RTK Adjustments = 0
                           RTK IK = 0
                           RTK VB = 0
Power monitor reset early warning = 0 (/LLO)

> <=== SENDING COMMAND ===>
config
Pleo Hardware Configuration:
  Hardware ID: 07051101-303B1F27-01002E07-FFFF78FF (01303B78)
  Serial Number: 110400466058
  Board Revision: 17-8
  Board Revision ADC: 536
Build Configuration:
  Firmware built for: Pleo
  Build type: RELEASE
  Pleo main ARM version: 8128 - Mar 19 2008 06:24:52
  Pleo head ARM version: 8128 - Mar 19 2008 06:25:46
  Pleo PM (DF) version: 8139 - Mar 24 2008 20:32:32
  Bootloader version: 7361 - Nov 15 2007 21:34:31
  Compiled in:   Thumb mode
  Resource folders:  on
MotorController Configuration:
WARN: low: motion: MotorController0 not configured.
  MotorController 0: Version 0
WARN: low: motion: MotorController1 not configured.
  MotorController 1: Version 0
WARN: low: motion: MotorController2 not configured.
  MotorController 2: Version 0
WARN: low: motion: MotorController3 not configured.
  MotorController 3: Version 0
VM Configuration:
  Incremental mode:   off
  Code swapping:      false
  malloc mode:        false
  main vm image:      4096
  sensors vm image:   3072
  auxiliary vm image: 2560
  user vm image:      2048

It troubles me to see motorcontroller not configured

can someone help?

[InmemoryofRomeo]

I have no idea what any of that means But is your Pleo doing absolutely nothing? No sound, twitching anything at all that suggest there's life in there somewhere? And when did your Pleo stop working, or has it never worked?

[mixan]

I put it away 6 months ago and then it worked.
Now it doesnt sound, move or anything, just a little click sometimes when i turn the power on 

[InmemoryofRomeo]

The click suggests that something is trying to work. Perhaps the tech support at Pleo World would be able to offer more help?

[mixan]

I mangaged to do the 1.0.2 downgrade thru windows xp, had to remove servie pack 3.

But,, nothing happends anyway. im starting to think that it has to much files in the system like this person writes here

http://andrey.mikhalchuk.com/2008/09/23/how-did-i-bricked-pleo-and-returned-it-back-to-life.html

Is there some way of deleting the files from camera, audio in dino-mite

<=== SENDING COMMAND ===>
ls: ---rw-x     1146 SYS_STATS.SSF
ls: ---rw-x       59 R_flag.txt
ls: ---rw-x     6704 pm_props
ls: ---rw-x        1 result.txt
ls: ---rw-x       21 automon.txt
ls: ---rw-x    28390 plogfile.dat
ls: ---rw-x    25740 audio1.wav
ls: ---rw-x     2732 pm_drives
ls: ---rw-x    76086 camera1.bmp
9 file(s) with total size 140879

because I dont understand how the guy in the link above did

Micke

[degers]

It looks like you have been using Dino-MITE incorrectly and have gummed up your onboard flash emory a bit!

If you want to remove those files you will need to run the following commands

access 3
rm camera1.bmp
rm audio1.wav

[mixan]

have some problem with access 3 command.

nothing happends.

just sending commando nothing more.

> <=== SENDING COMMAND ===>
help
Monitor help screen:
  access <password>                                   Change monitor access level


what is the password ?


it says could not remove camera1.bmp or the audiofile, maybe i need the right password for access 

how should i do this, am I missing something here

do you think it is my internal memory that mess my pleo up?

[mixan]

ok so I did manage to remove those files
didnt get any confirmation bout that but they are gone hehe

flashed 1.1 after removing sound file and camera file but still doesnt work

can I remove any other files?

> <=== SENDING COMMAND ===>
ls
---rw-x     1146 SYS_STATS.SSF
---rw-x       59 R_flag.txt
---rw-x     6704 pm_props
---rw-x        1 result.txt
---rw-x       21 automon.txt
---rw-x    28390 plogfile.dat
---rw-x     2732 pm_drives
7 file(s) with total size 39053


I dont know how the filelist should look

[degers]

Your filelist looks pretty normal.  Nothing else you should delete really.

No idea what has happened to your pleo.

[mixan]

 

I guess this is the problem then

MotorController Configuration:
WARN: low: motion: MotorController0 not configured.
  MotorController 0: Version 0
WARN: low: motion: MotorController1 not configured.
  MotorController 1: Version 0
WARN: low: motion: MotorController2 not configured.
  MotorController 2: Version 0
WARN: low: motion: MotorController3 not configured.
  MotorController 3: Version 0