The link - http://bobthepleo.com/forums/index.php/topic,5738.msg68279.html#msg68279

Note: This is my second Pleo and I have never seen it work, and the seller said it did the same thing a couple years ago but I assumed it was a battery problem.

And I want to add that I made the battery pack I use with a
6×AA battery holder and 6×1.2v 2000mAh Panasonic eneloop batteries,
the battery pack is working perfectly,
it reads 8.06v when fully charged,
I also added the thermistor from the original battery.
I would think it is software,
and that brings me back to "Reset Pleo with 1.0 downgrade or POP OS?".
I still don't exactly know which software to use or what to do with it,
you can check "Reset Pleo with 1.0 downgrade or POP OS?",
if you have any idea plzzzzz give some feedback.

-PleoLifeDino

So I wanted to turn my new Pleo on today but instead of normally turning on he made this "Huh" noise then moved a little,
and sometimes he repeats that over and over and over until I turn him off.
I don't know what OS he is on. And I don't know what to do,
I just need some help on this.

-PleoLifeDino

You can re-skin a pleo.  There are a couple of topics here on that.  But you will need to find another pleo to be the "donor" for the skin. 

Hi Taoworm.. I just chanced upon your post here...  unfortunately my pleo skins have already broken up/ torn.  For such cases .. is there anyway to reskin pleo or restore the current skin condition? Pls advise.  Thx

Just so you know what exact files I'm talking about,
I will write it down here.

POPOS .zip

automon.df
automon.txt
do_re_mi.usf
head.img
pleo.img
pleo.urf
readme.txt

Above is the content inside the PopOS .zip folder.

LifeOS 1 .zip

head.img
init.amx
pleo.img
pleo.pm
pleo.url
sounds (folder)
startup.amx

Above is of the content inside the LifeOS 1.0 .zip folder.

I hope this helps you help me! 
 
- PleoLifeDino 

Thanks for the reply!

But I still don't get it.
Does the LifeOS 1 fully reset Pleo?
If not will it be ok to use the PopOS?
The instructions only talk about LifeOS 1.0.2 and 1.1,
in the instructions it said to use all the files including the sounds folder.
So can I just put the whole .zip folder into the SD card?
And do I have to take out the .txt or any other files?
Thank you!

- PleoLifeDino

Silicone paints can also work for repairing small pin holes in the skin.

No, Ugobe pleos can't be named.
Their ID cards don't have a chip and it doesn't do anything. They can respond to sounds though.
With the pleo RB you can name them using the ID card. When teaching them the learning stones, you can also make them do tricks.
Though i'm pretty sure RB's will only respond to their name if you grab their attention first, this can be done by grabbing their nose or clapping infront of them.

I have used high quality acrylic paints to touch up a couple of pleos, and as long as it's not on a part that needs to be stretched like the back or on the head, it should work just fine. If you do need to touch up parts that stretch, i say use silicone paint. It's possible to buy it either as translucent silicone which you'll need to buy pigments for seperately or buy it pre colored.