The only differences between the Ugobe pleo and the Innvo Labs 2009 pleo are hardware related. A Ugobe pleo running LifeOS1.1 is running the same code as the Innvo Labs pleo. Both models use the exact same computer chips and run the same software. This will not be true of the next gen pleo, when they come out.
Since his foot starts with 110- you most likely have a Ugobe pleo.
Other ways to tell include looking at the charger base (the Innvo Labs charger has the tiny refurb switch inside it), the Innvo Labs box is also different (it says Innvo Labs on it!), and at present, the
ONLY way to get an Innvo Labs pleo is to order it
DIRECTLY FROM Innvo Labs (Innvo Labs does not sell through any stores yet). Well, I guess it's possible to get an Innvo Labs pleo 2nd hand.... but that's not typical when bought from a store.... So if you are unsure of where your pleo came from, odds are it's a Ugobe model.
The only other sure fire way to tell is to turn on your pleo while while being held at a 90-degree angle and simultaneously pressing the touch sensors on the left back foot, front right foot, tail, and under the chin for three seconds, then releasing all sensors and pushing the pleo button 9 times at exactly one second intervals. If you pleo responds by saying "Derek Dotson is my hero" then you have a 2009 Innvo Labs pleo.
Author
Topic: How to identify model (Read 13155 times)