Topic: And Bill makes, uh, two-and-a-half? (Read 7172 times)

mweed · « **on:** September 01, 2009, 10:37:05 PM »

Here's a good riddle:

What's green and brown and has ten legs?

This first part may be an old story to some, but . . .

A long time ago (in pleo terms) I was talking with some folks at Ugobe, and they asked if there was anything they could do to help with the comic strip, and I commented that I could use a broken pleo. One that I could take and use as a mannequin for posing for pictures. I needed a broken one, because to pose for Grumpy or Yorgurt requires being bent in positions no functioning pleo would ever be in. They gladly sent me a pleo . . .

That's how I got Emmy. But,rather than sending me a broken pleo, they sent one of their pre-production models, in pristine condition, and fully functional. There was no way I could use her for the modeling. Oh, well.

A year and more later, still in need of a broken pleo, we get a new member here on our forums. . . . Holiday_projectors, who happens to be the reseller of broken pleos! So, thanks to him, I now have Bill to pose and model for the comic strip.

Now, you won't see a character call Bill, but you will see Bill soon in the roles of Fred, and Grumpy, and Yogurt, and perhaps others . . .

So, as to the riddle, the answer is: my pleos.
So, withou any further rambling, here's Bill!

More details...

fancyfont · « **Reply #1 on:** September 01, 2009, 10:51:13 PM »

We still welcome Bill!

InmemoryofRomeo · « **Reply #2 on:** September 01, 2009, 10:52:22 PM »

Hi Bill

An important part of the team nonetheless

b blue eyes · « **Reply #3 on:** September 02, 2009, 08:36:10 AM »

How adorable Bill is. That is so wonderful that Bill can be posed in all kinds of ways. Perfect and I can't wait to see the comics.

mweed · « **Reply #4 on:** September 02, 2009, 08:53:02 AM »

I'm just surprised nobody said anything about the riddle or the photo.

Pleo Power · « **Reply #5 on:** September 02, 2009, 09:14:33 AM »

Yes. now that I look at him, is he missing his back legs?

and is the answer to the riddle three Pleo's but one only has two legs?

mweed · « **Reply #6 on:** September 02, 2009, 12:01:52 PM »

We have a winner!!! Woo-hoo!! You are correct!

Back legs just get in the way . . .

b blue eyes · « **Reply #7 on:** September 02, 2009, 02:52:36 PM »

I'm just surprised nobody said anything about the riddle or the photo.

Sorry about that MWeed. I guess I got so excited about a Pleo that can pose and that adorable baby just looking so sweet and I completely forgot the rest of the post! What can you expect from a grandma anyway? When I saw him all I wanted to do was scoop him up and hold him in my lap and rock him!

mweed · « **Reply #8 on:** September 02, 2009, 03:51:50 PM »

It took a bit of doing to pose him juuuust right so that you can't see the wires and stuff sticking out from under his backside.

b blue eyes · « **Reply #9 on:** September 02, 2009, 04:04:32 PM »

Yikes, wire and stuff, I am very good with a needle and thread but never tried wires and stuff. Poor Bill

mweed · « **Reply #10 on:** September 02, 2009, 04:21:24 PM »

Don't feel sorry for Bill. Think of it as cosmetic surgery. The back legs were removed without cutting any of the wires. All the motors and sensors are still connected to him. I have still some playing around to do to make the OS think the legs are still there.

fancyfont · « **Reply #11 on:** September 02, 2009, 11:09:21 PM »

Phantom motion?

InmemoryofRomeo · « **Reply #12 on:** September 03, 2009, 12:17:22 AM »

ROFL, I swear we have everything on these forums

mweed · « **Reply #13 on:** September 03, 2009, 09:14:33 AM »

Like I said, the motors and sensors are still attached. So as is, he thinks (the program detects) that there is no pressure on the foot pads, and therefore the back feet are off the ground. The positional sensors register the leg as fully extended. The touch sensor works as normal. When I touch the sensor, it registers as touching the leg. (I guess the program assumes he's ding a hand-stand . . .

So, fancyfont, he has phanton sensations. What I need to do is trick them into registering a normal value. The foot pad is not a pressure switch as I would have thought. It appears to be an LED and a light sensor.

fancyfont · « **Reply #14 on:** September 03, 2009, 09:20:33 PM »

All Bill will need is a pair of booties. That had to be a Kodak moment when you first laid eyes on him.

mweed · « **Reply #15 on:** September 03, 2009, 09:34:19 PM »

Here's Bill showing off his back legs!

More details...

fancyfont · « **Reply #16 on:** September 03, 2009, 09:43:04 PM »

At least he has legs if you want to reattach them. Or can you? Poor little dino!

mweed · « **Reply #17 on:** September 03, 2009, 09:48:01 PM »

All the wires and sensors are still there, so you probably could, but I really doubt you could get the skin glued together.

InmemoryofRomeo · « **Reply #18 on:** September 03, 2009, 10:23:04 PM »

Aww poor Bill, he needs a little wheel chair

Can't you just switch all the legs sensors off in DinoMITE?

fancyfont · « **Reply #19 on:** September 03, 2009, 11:04:04 PM »

Hang on to those legs!

Bill may be the first bionic dino.

mweed · « **Reply #20 on:** September 04, 2009, 08:08:50 AM »

I as thinking oversized mag wheels or perhaps skis for the winter . . .

Well, today marks Bill's first comic strip, as he poses as Fred. You just wouldn't get the apron to hang right or get that look of a pleo *standing* there screaming "STOP!!!" if you still had back legs in place.

fancyfont · « **Reply #21 on:** September 04, 2009, 09:51:32 PM »

Congratulations Bill on your first assignment! Well done!

Starfire · « **Reply #22 on:** September 26, 2009, 04:31:38 PM »

Quote from: mweed on September 03, 2009, 09:34:19 PM

Here's Bill showing off his back legs!
More details...

Ok - this just kind of creepy. Poor Bill laying there with his back legs in front of him!

Glad you got Bill so he can take up the hard work of being the gorgeous model for the strip.

gucci_boi7782 · « **Reply #23 on:** September 26, 2009, 11:45:48 PM »

Poor Bill!! Where was I for this thread??

mweed · « **Reply #24 on:** September 27, 2009, 04:33:23 PM »

I guess you were "vegging out"!

Bob the Pleo Forums

Author Topic: And Bill makes, uh, two-and-a-half? (Read 7172 times)