Old Pleo model 2008 won’t work. Need Technical assistance.
I just picked up an old Pleo going cheap and am trying to bring it to life.
Trying to flash it with the 1.0.2 but nothing.
Typing LS on the internal SD B: shows no files.
LS A: shows
SD card not present
I know not to use anything bigger than 2GB SD. I've tried 3 x 2GB SD;s (integral ultima pro 133x, 2gb micro sd sd-co2g Taiwan and traveller high speed sd). All are non HC.
Battery reports full charge.
config
Pleo Hardware Configuration:
Hardware ID: FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF (FFFFFFFF)
Serial Number: 123456789ABC
Board Revision: 17-8
Board Revision ADC: 522
Build Configuration:
Firmware built for: Pleo
Build type: RELEASE
Pleo main ARM version: 8128 - Mar 19 2008 06:24:52
Pleo head ARM version: 8128 - Mar 19 2008 06:25:46
Pleo PM (DF) version: 0 - Jan 01 1970 00:00:00
Bootloader version: 7361 - Nov 15 2007 21:34:31
Compiled in: Thumb mode
Resource folders: on
MotorController Configuration:
WARN: low: motion: MotorController0 not configured.
MotorController 0: Version 0
WARN: low: motion: MotorController1 not configured.
MotorController 1: Version 0
WARN: low: motion: MotorController2 not configured.
MotorController 2: Version 0
WARN: low: motion: MotorController3 not configured.
MotorController 3: Version 0
VM Configuration:
Incremental mode: off
Code swapping: false
malloc mode: false
main vm image: 4096
sensors vm image: 3072
auxiliary vm image: 2560
user vm image: 2048
The hardware ID and serial number look very odd.
Are there any internal button battery’s that need replacing?
Does anyone think it can be brought back to life?