Bob the Pleo Forums

Pleo Stuff => Pleo Problems => Topic started by: ginarb on November 25, 2018, 10:46:28 AM

Title: HowTo resurrect "dead" Pleo RB
Post by: ginarb on November 25, 2018, 10:46:28 AM
Hi there,

yesterday we got our new Pleo RB (used from eBay). innvo-labs-serial is 6629 ********.

Now the problem: When we try to turn him/her on (with a loaded battery), the green led lights up for approx. half a sec, goes out and switches to continous red. The power button seems out of function then. The only way to turn him/her off, is to pull the battery.

Is the dino dead? What can I do to wake him/her up?

Many thanks in advance!
Title: Re: HowTo resurrect "dead" Pleo RB
Post by: mweed on November 26, 2018, 03:46:08 PM
First step is to check the battery in the foot.  Make sure it is seated properly and as a used pleo, it may be dead and needs to be replaced.

Check out this topic for info on how to replace the foot battery: http://bobthepleo.com/forums/index.php?topic=2315.0
Title: Re: HowTo resurrect "dead" Pleo RB
Post by: Piggy on December 08, 2018, 11:26:01 AM
Did you try the reset button?