Bob the Pleo Forums
Pleo Stuff => Pleo Archives => Archive -- Technical common => Topic started by: alvis on September 25, 2009, 09:57:31 PM
-
im buy new pleo from ebay, adaptor input voltan is 120v ,sadly my coutry need 220/240volt ... :(
and i need to buy a another adaptor at store, but my problem is can i use adaptor of 1200ma 12 volt output? cuz that original adaptor is 800ma? if cant,can i change voltan adaptor 1200ma 12v to 11volt output ?maybe safety or will it explo sudenlly %)
and all pleo adaptor come with 120v?
-
Hi Alvis, the best thing to do would be to take the adapter and charger cradle (and preferably a battery as well) into an electrical store and ask the experts :)
Using the wrong voltage may destroy the cradle :(
-
they say no problem about higher ma , it will be fast charge and 101%fully charge . but i still no confident, and hope somebody will know about that here..
-
I had to buy a new adapter too, mine is 12 volts 7 amps, the original was 12 volt 8 amps, I guess the only way to find out really is to try it.
Or wait until one of the more technical minded people get on...
-
The amount of amps the supply provides is sort of irrelevant as the circuitry inside the charger cradle will limit the amps supplied to the battery pack. When the pack is fully charged the circuitry will drop the amps provided to a trickle level to keep the pack fully charged without overcharging it.
As long as the positive voltage goes to the inside and the negative to the outside of the power plug on the end of the power supply, it will be fine.
-
:o ic icc... that mean it safe to use~~thanksss!