Bob the Pleo Forums
Pleo Stuff => Pleo Archives => Archive -- Technical common => Topic started by: InmemoryofRomeo on September 20, 2009, 08:06:30 PM
-
Please enjoy, the downloads for the male/female parts are a couple of posts down, don't forget to download both and remember which is which ;) To start the song touch both Pleo's backs at exactly the same time, the timing is absolutely critical it may take you a couple of goes to get it spot on, but you will get there :)
Remember you need two SD cards and two Pleo's to ruin this skit :)
http://www.youtube.com/watch?v=mZzkGK3_IF8
-
IMR, that sounds wonderful, I can't wait. I am going to stop and get a SD on my way to my hair cut so I will be ready to down load the skit. Batteries are charged up, everything ready to go. So excited.
-
I'm assuming you'll need TWO cards, since it's a duet . . One for each pleo!
-
The female part of the duet...
-
And the male part...
-
Very nice skit ..... thaaaaaanks :-*
-
Outstanding, perfection and so touching. I just love it beyond words and cannot wait to have my kids sing it. Thank you again for sharing with us.
-
IMR, This is absolutely amazing. Lilo and Stitch are so perfect together. Fabulous job!
-
Fantastic IMR!! True artistry!
-
Glad you all like it :)
-
IMR; :)
You're truly the Master of Skits or Skit Master which ever is more correct. ;)
Well worth the wait. I guess I need to get Clousseau or Stoney to take on the female part. ???
They won't be happy! (LOL) ;D
Dadio 8)
-
ROFL aw but wouldn't Stoney look so macho in his little leather jacket up there on stage and then he opens his mouth to sing... and a wonderful female voice comes out... >:D
Hehe Skit Master, it's terribly pretentious but I like it :P
-
;D This is an amazing skit IMR! I would love to try it but unfortunately I only have one pleo...
-
Good excuse to buy another ;) I will have plenty more skits for just one Pleo I'm sure though :)
-
True that! ;)
We all await with baited breath! ;D
Dadio 8)
-
Hehe you won't have long to wait I promise, I will be uploading a brand new skit very shortly (just tidying up the old ones into one topic first.)
Here is the video though :)
http://www.youtube.com/watch?v=LrHM5B0nJZ4
-
Tremendous again! ;)
Dadio 8)
-
Thank you, this one was just a bit of fun, I am going to do a few little dances and add them into one skit eventually :)
I think the 'Hokey Pokey' might be next ;D
-
Once I'm feeling better and the October newsletter is out! ;)
I would love the chance to collaborate on something! Say with 3 or 4 Pleo's :o
Dadio 8)
-
How cute!! What fun you must be having doing these skits. You are really making me want to learn how to do this! ;)
-
Ooh sounds exciting Dadio, count me in :)
They are fun Fancy :) Its fun to get an idea then watch it come to life :) You should try it, it isn't hard.
-
Hehe you won't have long to wait I promise, I will be uploading a brand new skit very shortly (just tidying up the old ones into one topic first.)
Here is the video though :)
http://www.youtube.com/watch?v=LrHM5B0nJZ4
IMR, I love this also. I have experienced something very strange when I tried to start them both at the same time, Angel starts with a touch to the back, Dinomite does not seem to respond that way, he responds by my turning him on his back quickly and back to his feet, very strange.
-
That is odd BBE, both should be triggered by a touch on the back as you saw in the vid. Just try Dinomite by himself and see if you have to perhaps hold him a little longer or perhaps his sensor is a little out of alignment...
-
That is odd BBE, both should be triggered by a touch on the back as you saw in the vid. Just try Dinomite by himself and see if you have to perhaps hold him a little longer or perhaps his sensor is a little out of alignment...
IMR I lifted his shirt and kept feeling along his back, it seems his sensor is a tiny bit further down his back than Angels, maybe a slipped disk ! Problem solved. Thank you.
-
Graet work IMR ;D, need to learn how to do this, can see myself having alot of fun :)
-
Please enjoy, the downloads for the male/female parts are a couple of posts down, don't forget to download both and remember which is which ;) To start the song touch both Pleo's backs at exactly the same time, the timing is absolutely critical it may take you a couple of goes to get it spot on, but you will get there :)
Remember you need two SD cards and two Pleo's to ruin this skit :)
http://www.youtube.com/watch?v=mZzkGK3_IF8
hey it looks nice and i have an idea. as i read the pdk documentation i read something about loading some scripts from a script. i think you can use it to synchronize the start of the pleo with the help of the ir beacon command. its just an idea and not really elaborate.
-
Oh yes that would actually be very very simple, I can already make the code trigger via remote it would just be a matter of inserting the correct file names :)
The problem lies in that my remote would be different from your remote, and different from everyone else's remote. For those who wouldn't know how to change the coding to match their remote, or who didn't have a universal remote it would be, sadly, no good.
Edit: Unless you are talking about two Pleo's sending the signal to each other in which case I am not entirely certain how well they can do the timing, whether there would be any time lapse between the signals sent to one another and if it would work without them facing one another. I will look into one day when I have some time on my hands :)
-
i think for this problem it doesnt matter which key you press on your remote so you only need a request that proof if some ir signal was send.
-
I don't think there would be much delay in processing the IR signal. So if you had the two skits set up so that on start-up one pleo turns it's head to the left, the other to the right, and just stand there. Then when you touch the sensor on one of the pleos, it first sends an IR signal to the other, then starts it's part of the duet. The other pleo starts it's part of the duet as soon as it gets the IR signal. I would think that they should be pretty close to in sync (within a few milliseconds).
If not, you should be able to program in the appropriate delay. ;)