Bob the Pleo Forums

Pleo Stuff => Pleo Archives => Archive -- Technical common => Topic started by: Necky83 on August 25, 2009, 11:50:58 PM

Title: Reset to put back into the box???
Post by: Necky83 on August 25, 2009, 11:50:58 PM

Hi all,

we are going to move in November and i want to put Littlefoot and Cera in the original boxes to keep them
safe.
Well... Do i have to reset them completely to get them in the box position???

I hope not because they learned a lot  ;D

Thanks  8)

Nadine

Title: Re: Reset to put back into the box???
Post by: InmemoryofRomeo on August 26, 2009, 12:07:13 AM

Just hold down the black Pleo button on their bellies, after around fifteen seconds or so they will move into the box position and you can quickly switch them off (but be quick they only stay that way for a moment :P)

Title: Re: Reset to put back into the box???
Post by: Necky83 on August 26, 2009, 12:12:33 AM

Thanks  ;D

Title: Re: Reset to put back into the box???
Post by: snowy on September 17, 2009, 05:26:54 AM

hello

does this reset their personalities though please?

many thanks

dee (snowy)   :(

Title: Re: Reset to put back into the box???
Post by: CleosDad on September 17, 2009, 02:26:05 PM

From what I've read, and seen with my Cleo, the packing position function has no effect on the personality.
I've used it many times to keep the strain off the cables, clutches, and springs while I'm not using Cleo.

Title: Re: Reset to put back into the box???
Post by: InmemoryofRomeo on September 17, 2009, 05:36:19 PM

There is no way of resetting the personality except with the downgrade, the Pleo button can be used without fear :)

Title: Re: Reset to put back into the box???
Post by: alexlloyd54 on October 04, 2009, 04:35:38 PM

Quote from: InmemoryofRomeo on August 26, 2009, 12:07:13 AM

Just hold down the black Pleo button on their bellies, after around fifteen seconds or so they will move into the box position and you can quickly switch them off (but be quick they only stay that way for a moment :P)

what i usually do is that i insert an SD card inside the pleo which contains a skit from dinomite (you can find it in one of the directories when you install the software)

the function of this skit is to put the pleo in a "box" position, as soon as you turn the pleo, you would hear it say:  Dinomite Started!

 :)