Bob the Pleo Forums
Pleo Stuff => Pleo Archives => Archive -- Technical RB => Topic started by: Miqguel on July 26, 2015, 07:08:44 AM
-
Hi, today I was trying to test ProbeRB with Kawki, I have done all the things correctly, but when I turn Pleo on it says: Welcome to ProbeRB version 1... Propery load failed, giving up :o :( is there a way to fix this?
-
I've never heard of this issue before unfortunately. Have you tried Stats RB as well? Even if it doesn't work properly, it might give you a bit more info. Is your Pleo working normally?
-
Yep, my pleo is working normally, I tried before with stats RB but when I click statsRB.html It doesn't appear anything in my web browser it's all in blank, thats why I tried later with probeRB, deleting before the past files from stats rb. Possibly is that the micro SD is 32 GB? Thanks for answering me :)
-
The size of the card is probably the issue. Anything larger than a 2 GB card will likely not function properly in an RB. Cards that small are difficult to come by, but they do exist.
-
hI , I AM SURE aibo is right, it is the size of the card, 32 GB is HUGE! I just used a 8 GB micro SD card a few days ago on my newest un named baby Pleo RB, so I know up to 8 GB is ok, 2 is better though and I am sure if you used anything larger then 8 GB, you would have problems, I do not know the situation where you live but I am sure you can find a smaller GB micro SD card where you live ,otherwise try someone like Amazon, they have most anything and very fast shipping. Ideally though you can find one where you live without having to order one.
The other great thing is that you can use it over again with new results or use it in your camera for videos etc. Good luck.
RWM and the Pleo township of the Redwoods
-
I'd also say the card is too big unfortunately. Every other time a bigger card is better, except Pleo's!