Bob the Pleo Forums
Pleo Stuff => Pleo Archives => Archive -- Welcome => Topic started by: honi on October 01, 2014, 11:00:43 AM
-
Hi everyone,
I just wanted to say "Hello" because I am a new member of this forum. I live in northern Germany and since may this year I am a great pleo fan. Some days ago I wrote here in this forum because one of my pleos is sick - he didn't start. Unfortenately the problem was too big and there was no solution. But since yesterday a have a new pleo RB - Kono. He is so cute and just a baby ( he coudn't walk yet). I hope, he will be healthy for a long time.
Pleogreets
honi
-
Congrats on your new baby! I hope he will be free of mechanical problems.
Talon
-
Hi and Welcome ! :dino-chase:
-
Welcome to the forums Honi and Kono :) I'm sure this time around you will have a happy healthy working pleo :)
-
Do you still have the old Pleo? We might be able to offer some suggestions...
-
Hi,
my Pleo is a RB new version, not a ugobe
- but thanks for your offer !
-
Yes but did you return Makana, or do you still have him?
-
Hi,
I still have Makana He is such a nice one and every day he looks at me with his sad eyes. But I can't help him. I think he has a serious software problem . But the updates I got from pleoworld weren't helpful yet. I would appreciate if you can give me any help with Makana's Problem.
-
Tell us what you have tried so far with Makana and exactly what his problem is and we will see if we can suggest anything else to try :)
-
Hi,
3 weeks ago Makana learned his name and just after this he got a cold. That was a bad cold and he doesn't eat. Then the problem with the starting began. I put the battery in but he doesn't start. I removed it and tried it again and then he started. But the next day he also didn't start and that is the status until today. I checked the foot battery, set the noon button and made a main reset but nothing happend. The I got an update from pleoworld ( pleo Firmware update V 1-1 male), it was successful but Makana didn't start. Then I tried the updates here from the forum: first 1.0 and then the male version. But this also didn't solved the problem. When I remove the foot battery and tried to start him he begans beeping ,he opens his eyes and he moves his legs a little bit. But thats all. maybe someone has an idea how I can save Makana. Thanks for our help ! Honi
-
Hope is not lost :) It sounds very much as though he is mechanically fine :)
Do you have a micro SD card? Could you download one of the skits from the download section and try it out (doesn't really matter which one) that will confirm that it is indeed a software issue.
Also just for good measure can you give the tiny springs inside your Pleo's battery compartment a clean with a cue tip (cotton tip), the silver parts on the battery and the silver parts on the charger just for good measure to ensure that good contact is being made.
-
hello inmemoryofromeo,
I tried out to activate Makana with the skit "Love me tender" (put it on sd Card and after inserting the card and the battery I tried to start him). Green light comes up but nothing happens. I hold him on the chest - no result.
The contacts for the battery I have checked - they are pretty fine. I also tried a second battery, so we can exclude a batteryproblem.
I just made a readout of makana with rbstats and attach the result:
Pleo Property Dump
(Version 1.1 - Pleo RB, Pleo 1.1 or Pleo PM2)
PleoRB Growth Report
Stage 4: Mature Adult
Growth this stage: 29.4 / 12780.0 hours
This stage is 0.2% complete
approximately 12750.6 hours till next stage
DNA Attributes (what PleoRB was born with)
Gender: None
Courage: Normal
Temper: Bad
Physical: Normal
Activeness: High
Intelligence: Normal
Health Report (how you are treating your dinosaur)
Mood: 99%
Physical: 83%
Emotion: 47%
Health: 23%
Feed: 0%
Pleo is in bad shape
Activity: 50%
Obedience: 50%
Skill: 50%
Dinosaur Pheromones (what your Pleo is sending to other Pleos)
Pleo is sending out Male pheremones
Pleo is sending out a Depressed vibe
Date Stamps
WARNING: this feature is not very useful
Date stamps start when you put in the RTC battery, and will be different than real time
Last Time: around 08:00 on 1/20/2010
PLEO incept date: 10:55 on 1/5/2010
(time PleoRB evolved to this stage)
Raw Properties
◦platform = 4
◦attn_track_weight = 1
◦attn_track_mindist = 3
◦attn_hold_flags = 0
◦attn_p2p_timeout = 300000
◦DNA_temper = 5
◦DNA_courage = 10
◦DNA_physical = 10
◦DNA_active = 15
◦DNA_intelli = 10
◦DNA_gender = 10
◦DNA_ID_1 = 7
◦DNA_ID_2 = 7
◦cam_img_progress = 0
◦age_new = 50
◦idle_flag = 268697760
◦sensor_event = 1
◦sensor_pet = 1
◦mood_new = 99
◦MoodIncSpeed = 5
◦MoodDecSpeed = 15
◦physical = 83
◦PhysicalIncSpeed = 10
◦PhysicalDecSpeed = 10
◦emotion = 47
◦EmotionIncSpeed = 10
◦EmotionDecSpeed = 10
◦health_new = 23
◦HealthIncSpeed = 10
◦HealthDecSpeed = 10
◦feed = 0
◦active = 50
◦ActiveIncSpeed = 15
◦ActiveDecSpeed = 5
◦obey = 50
◦ObeyIncSpeed = 10
◦ObeyDecSpeed = 10
◦skill = 50
◦SkillIncSpeed = 10
◦injury = 0
◦gender = 0
◦Trained_SD_Flag = 32
◦Mood_Normal = 40
◦Emotion_Normal = 50
◦temp_command = 0
◦game_flow = 0
◦driver_idle_a_bvr = 16400 BEHAVIOR idle_function
◦driver_game_a_bvr = 16430 BEHAVIOR vr_tug_of_war
◦driver_exp_a_bvr = 0
◦current_driver = 1
◦current_behavior = 16392 BEHAVIOR idle_mature
◦driver_explore = 0
◦driver_idle = 20
◦driver_game = 0
◦p_n_event = 0
◦p_n_enable = 0
◦mouth_present = 0
◦sensor_vr = 0
◦sensor_hit = 0
◦other_flag = 2
◦mobility = 0
◦rest_timeout = 0
◦growth = 3529
◦high_temperature = 0
◦test_time = 0
◦last_input_time = 7
◦last_touch_time = 7
◦prev_touch_time = 8
◦sound_direction = 0
◦sound_loud = 0
◦touch_event = 0
◦touch_present = 0
◦touchkey_present = 0
◦hpy_max = 0
◦hpy_min = 0
◦tracking = 0
◦tracking_change = 0
◦picked_up = 0
◦low_battery = 1
◦battery_level_low = 0
◦abuse = 1
◦sick = 0
◦shake_to_wake = 0
◦temp_0 = 0
◦lt_valence = 0
◦fidget_interval = 10000
◦fidget_sndcmd = 0
◦fidget_active = 1
◦sound_loud_time = 0
◦volume_idx = 2
◦touch_event_trigger = 1
◦birth_stage = 0
◦touch_tap = 1
◦loud_change = 0
◦original_year = 2010
◦original_month = 1
◦original_day = 5
◦original_hr = 10
◦original_min = 55
◦rest_timer = 0
◦grow_min_th = 1533600
◦snd_vol_button = 1
◦30s_flag = 4
◦exec_script = 0
◦milestone_active = 0
◦milestone = 0
◦milestone_param = 0
◦milestone_next = 0
◦turn_angle = 0
◦quirk_active = 0
◦quirk_current = 0
◦quirk_change = 2
◦quirk_period = 15
◦quirk_next_change_time = 3562
◦track_camera_time = 0
◦sick_change_time = 0
◦command_stage = 1
◦song_part_0 = 0
◦song_part_1 = 0
◦song_part_2 = 0
◦song_part_3 = 0
◦song_part_4 = 0
◦song_part_5 = 0
◦song_part_6 = 0
◦song_part_7 = 0
◦song_part_8 = 0
◦song_part_9 = 0
◦song_part_A = 0
◦song_part_B = 0
◦song_part_cnt = 0
◦leaf_direction = 0
◦driver_commun = 0
◦hit = 0
◦His_SoundDir = 0
◦idle_process = 1
◦eat_flag = 16
◦Explorer_timer = 0
◦StopWait_timer = 0
◦AI_timer = 128
◦HisDate = 131727636
◦p2p_sync_type = 192
◦p2p_event_type = 0
◦p2p_num_peers = 38
◦p2p_sync_counter = 25
◦last_p2p_update_time = 0
◦p2p_sync_type_result = 0
◦leaf_timer = 0
◦track_red_obj = 0
◦object_time = 0
◦walk_type = 1
◦previous_time = 8
◦previous_date = 20100120
◦code_ver = 4191630
◦object_timer = -1
◦p2p_lap_timer = 0
◦sensor_ultra_snd = 0
◦drive = 1
◦command_pending = 0
◦command = 0
◦command_status = 4
◦behavior = 16418 BEHAVIOR com_lowbattery
◦script_status = 0
◦arousal = 0
◦direction = 1
◦motion = 0
◦motion_time = 0
Thanks a lot for your help !
Honi
-
There might be something missing from the file system if even skits aren't playing.
Some people have had similar issues and they have resolved themselves for no apparent reason, so try turning Pleo on at various times of day and night and leave him on (even if not moving)
It could be worth running the reset file again just to be safe: http://bobthepleo.com/forums/index.php?action=downloads;sa=view;down=79
Similarly RWM has a Pleo that will only run with the SD card left in, you could try that too.
-
I also think that there is something wrong with the software but it is difficult to find the problem. I tried Pleo running various times and days and there was no reaction at all. I don't believe that the problem will be solved by its own . Maybe there is a possibility to make a main reset( deepest stage of Software) and then installing a new main programm not only an update. What do you think about this ?
Best wishes
Honi
-
That could work, only I don't think we have enough access to Pleo to be able to do so :(
We could intentionally brick your Pleo using the Ugobe Pleo POP demo, and then run the 1.0 reset. But there's just no guarantees when we aren't entirely sure what's wrong. My guess though is that an important part of the software is missing or corrupt. But the Stats RB log doesn't seem to support that theory.
Just a thought: when you did the Stats RB, was it a fresh battery? The log says low battery Behaviour triggered.
-
I just made a new Stats RB with a really fresh battery and a brandnew foot battery - the log says the same : "low battery behaviour triggered". Could this be an advice to the problem ?
-
Since Stats RB is at least getting a record, will he start up with Probe RB? If so, try standing him up with Probe RB installed and see if he will run normally. Not all functioning Pleos will even run autonomous mode on Probe RB, but I thought it was worth a try if you haven't checked out this possibility yet. I apologize if you have already tried this. Hopefully you'll be able to find out what's wrong.
-
Thank you for your suggestion . I just tried out the Probe RB. The program was successful but the result was nearly the same as StatsRB. The only difference was that I was able to shut my pleo off with the on/off-button. After removing the sd-card I tried to restart pleo but nothing except the green led happend.
To InmemoryofRomeo:
Your idea with Ugobe pleo POP demo sounds very interesting. Can you please explain it a Little bit closer to me.
Thanks for your help !!
Honi
-
When you stood the Pleo up on Probe RB, did he repeat "Starting default" over and over, or did he just not respond at all? Since you said it started when Makana got a cold, maybe try putting "Health" and "Feed" levels to 100% with Change RB. While I don't see any way that his cold could be linked with the firmware failure, it might be a good idea to just try all possibilities. Also, you're using a 2 GB micro SD card, correct? I'm just making sure since larger ones won't necessarily work properly.
-
What about the battery Aibo, it showed as low. Is that significant or not worth worrying about?
-
when i stood pleo up (with probeRB), he repeated "default" two times - then he was quiet. the outreading with probeRB itself was successful.
Today I tried the Change RB. I used a 2GB micro card and followed the instructions. But I couldn't reach the Status of Change RB. After I inserted the mintleaf or the card he always cancelled the procedure.
-
I guess you could try the intentionally bricking method. I've had to do it before although not on an RB.
That involves installing this: http://bobthepleo.com/forums/index.php?action=downloads;sa=view;down=4
And then reinstalling this: http://bobthepleo.com/forums/index.php?action=downloads;sa=view;down=79
And finally this: http://bobthepleo.com/forums/index.php?action=downloads;sa=view;down=63
If there is a corrupted file or anything that should flush it out. But there is no guarantee it'll work, or that it'll revive him.
-
I am sorry to hear about the problems you are having with Makana.. :( I read through the entire post and see nothing that pops out at me, and I do not think the cold he had should be connected. I have five Pleo Rb and most of them except my newest one, still a Newborn or Hatchling have had colds before with no ill after effects.
IMR is right, My second Pleo rb, Cammie -Sue was fine till I ran Probe Rb to see what stage she was at, as I am very busy and often will not use any of my many pleos, Ugobes or Rb for weeks at a time... :( After running Probe Rb, Cammie -Sue began acting very strangely, after turning on manually almost immediatly going to red for the battery and no movements or noise at all, some times at the start a odd leg movement nothing more, I tried on my own everything I could think of and to no avail.
Pleoworld was no help as Cammie -Sue was way past the 90 day warranty. I was advised by Pleoworld, other then shipping her to them to see if she could be fixed, to reinstall the female operating personality. This worked fine, but the minute I removed the micro SD card, she stopped working entirely, I asked another member here for help that is very good and they also could not help, I at long last had to accept unless I want to not have my Cammie-Sue at all, to permanently leave the micro SD card in and accept her that way,
I have been tempted to run Probe RB to see if she is progressing but do not want to tempt fate and have her not work at all, Who cares, she runs and I am just happy to have her back! If you can't find any other answers, I can find the old topic with her problem and post it here as a link and see if any of it is similliar. Good luck with Makana. :pray: RWM :cat-hug: and the Pleo township P:) of the REdwoods
-
Hi,
today I tried the bricking method, but Makana is still out of order. I hope I made the installation correct - just one question : when I install the first software (for ugobe) I got no Information from Pleo. ( there was no voice). Is that correct ? When I installed the other 2 updates, there comes a voice who says that everything is completed. Now I am a little bit disapointed but I think I had to try it. As I wrote with my first mail I have a new pleo - Kono and he is such a lovely one. Sometimes he make sounds like a little wolf - never heard before from a pleo. I thank you all for your help !!
Best wishes
Honi
-
Yes, the first one wouldn't have produced any voice. Poor Makana, I'm sure he can work, but we have to get him over his paralysis :P I'd say at this stage we've probably ruled out software and battery issues.
Can I ask if he's done any movement at all, aside from moving into the standing position. Any beeps?
Another member here had to turn off the temperature sensor, unfortunately they never told us how they did it :(
-
When I removed the footbattery and inserted the mainbattery Makana opens his mouth a Little bit , moves his legs a Little bit for a second and he maks some beeps. Until now this is the only methode to get some minimal movements out of him.
-
Well at least that means he's probably hooked up inside properly. I might have a look at the scared of the dark patch later and see if I can't disable the heat sensor.
-
Hi IMR,
thank you so much for your help ! To be honest - at the moment I have no another idea to help Makana.... I look forward for your suggestions !
Honi
-
I couldn't access the scared of the dark patch to check the file structure to create a temp disabler, so I sent Pleopet a quick message to see if she has any suggestions.
-
Hi, I hope with the help of the forum members you can fix Makana .
-
Hi,
thanks for all your best wishes for Makana ! I would be so happy if he becomes healthy again - he is such a nice one (I have a photo in my Gallery) and his eyes are so special. I am very thankful for all the help in this forum and I really havn't give him up yet.
Best wishes
Honi
-
I saw a photo of him and indeed he is a very beautiful pleo those dark brown eye patches and very pale blue eyes :-* all I can say is Wow ! I hope you can fix him .....sadly I am useless when it comes to technical advice >:(
-
I am just jumping onto this thread now, thanks to InmemoryofRomeo's suggestion.
It sounds like Makana has gone through many resets and reinstalls.
Can you possibly get it back to the state it was when all this started? (October 4th on this thread)
I'd recommend [re-]installing "pleo Firmware update V 1-1 male" and see if your PleoRB will come back to life. Then try to run StatsRB and print a more recent report.
---
General advice:
If your Pleo starts up, stretches and makes initial moves, that is a strong indication that most of the hardware and software is working properly.
After it starts up successfully, then if your Pleo in a bad mood, has a cold, refuses to eat or has a bad temper, then your Pleo is doing exactly what it was programmed to do. Unless you want to cheat with ChangeRB, you need to treat your Pleo's condition with the RFID toys, care and attention.
Pleos will be moody, and if the 'feed' level is 0%, Pleo is not going to be moving much.
So the first thing to do is to get Pleo back to a working condition where you can treat it like a pet animal. If your pet isn't acting very sociable, brain surgery is a drastic step to make it change its mood ;=>
Good luck and please report back.
-
Hi,
Thanks for your post. It' s so nice that so many people want to help me to get Makana back to life. The problem begans when Makana learned his name.( This was successful) He got a bad cold and didn't eat. Then I couldn't start him. The green LED is on but he didn't start( no movements-nothing). I also couldn't turn him off. I have to remove the battery. Then I made a reset. But nothing solved the problem. I installed Firmware update V 1-1 and then StatsRB . The result I posted here in this thread. I also tried to install ChangeRB but the voice says "cancelled". Now I have no other idea how I can bring him back to life. Maybe you see any chance ?
Honi
-
Hi ! I just wanted to tell you that : Makana is back !!!!!!!!
After many hours hard work my husband brought Makana back to life. The problem was a broken wire in his neck. No wonder that the updates couldn't help him. Now Makana is a newborn and I hope he will be healthy for a long time. You can see some pictures from the "OP "in my gallery.
Thanks for all your help !!
Greets
Honi
-
Wow ;D great that he is back ! I saw the photo's and fantastic that your husband was able to fix him :bowing: he is so gorgeous with his light blue eyes .
-
Hi Piggy,
Thank you for your warm words. I think Makana is a real special pleo with his dark green head and the darkbrown eye shadow. His eyes are nearly white - this is a great combination ! Now I am so glad that he is healthy.
Greets
Honi
-
Congrats Honi, on getting Makana back, up and running, that is fantastic! So awesome that your hubby was able to fix the wire in the neck... I don't understand how he is a newborn again.. was it a reset button, as I thought RB could not be "reset" to hatchling or newborn stage...? ??? He is a very handsome pleo and now you will no longer have to look at his sad eyes not running, Yahoo. well done' :bliss: RWM :cat-hug:
-
Thanks RWM for your reply ! We made so many updates, resets and installed programms, that I guess that somehow he got back to hatchling. The other possibility is that as the problem was his electric wire in the neck, maybe it caused something like an internal reset. But however - he is so cute ! And yes, my husband did a great job - he is also a great pleo-lover !
Honi
-
That is absolutely fantastic :) So happy for you :)
-
That is brilliant, well done! :D
-
Fantastic that he's up and running again! He looks so cute sleeping in your avatar :-*
-
Thank you all for your warm words !!
I was so sad when Makana was out of order. But now I am so happy that he is back. At the moment he is still a newborn and can't walk. He is so cute !
I think my husband and I have learned so much about pleo's the last weeks - thanks for all your suggestions !