Bob the Pleo Forums
Pleo Stuff => Pleo Archives => Archive -- Technical RB => Topic started by: pickelish on December 31, 2012, 12:15:54 AM
-
I put the SD card in and turned my pleo on, he started moving around and making normal sounds for about 5 minutes then went to sleep. After about 3 minutes of snoring he beeped and I removed the SD card and restarted my pleo but now he still goes to the sleep position when turned off! I had to do the update twice because the fist time I wasn't sure how to unzip a file, I thought my computer did it by itself, and when the update seemed to have no effect I unzipped the file and did the update the second time, but the exact same thing happened and the update still doesn't seem to be working! What should I do?
The card I used was a 2 GB
Is this the correct update? http://bobthepleo.com/forums/index.php?action=downloads;sa=view;down=63
-
It doesn't sound right, are you sure you unzipped the file onto the card? They need to be directly on the card and not in a file. I would try again. Good luck! :)
That is the right update, for a boy. :)
-
Can they be in a file on the card, or do I need to take each item out of the file and put them on the card individually?
-
They should not be in a file on the card. I usually unzip the zipped file on to my laptop then copy the files onto the Micro SD card, if that makes sense? :pray:
-
They should not be in a file on the card. I usually unzip the zipped file on to my laptop then copy the files onto the Micro SD card, if that makes sense? :pray:
That's right, unzip the file and put the contents directly at the root level of your card (not inside a folder on your card)
-
It worked, thank you! It was so strange to hear a womans voice coming out of my pleo :P
-
Hurrah! Well done! ;D
-
Yay! glad you got it sorted :)
-
Yay! So glad to hear your little one has been successfully updated!
Talon
-
It worked, thank you! It was so strange to hear a womans voice coming out of my pleo :P
Groovsky! :dance013: