Bob the Pleo Forums

Pleo Stuff => Pleo Archives => Archive -- Technical Classic => Topic started by: UnkownRight on December 22, 2011, 09:23:16 PM

Title: How do i reset my Fade to infant?
Post by: UnkownRight on December 22, 2011, 09:23:16 PM

How do i Reset My Fade To Infant?
I feel like resetting him for fun and start all over again :)
Oh and Btw when my Fade was a Hatchling he went Juvenile in about 40 mins :)

Title: Re: How do i reset my Fade to infant?
Post by: InmemoryofRomeo on December 23, 2011, 02:40:42 AM

There is currently no way to reset an RB back to the hatchling stage.

Title: Re: How do i reset my Fade to infant?
Post by: Crewella on December 23, 2011, 04:32:32 AM

If I remember right Fade is a Ugobe Pleo?

Do you know what OS Fade is running?  If he's running 1.1 and you upgrade to OS2 then he will go through something very similar to a hatching phase ...... and a long 'difficult' teenager stage! :P

Title: Re: How do i reset my Fade to infant?
Post by: UnkownRight on December 23, 2011, 12:21:25 PM

I got him the PM2 update i think that what it is called :/ And yes it is a Ugobe Pleo(The Original not RB)

Added:Do i have to update him to OS2?

Title: Re: How do i reset my Fade to infant?
Post by: Crewella on December 23, 2011, 02:21:55 PM

It kind of depends what you want to do.  All upgrades/downgrades as far as I know will wipe the memory and start again, but I believe only downgrading to OS1.0 or upgrading to OS2 will actually go through a hatching phase again, or similar.

Just to check, what is Fade running right now?

Title: Re: How do i reset my Fade to infant?
Post by: UnkownRight on December 23, 2011, 03:07:22 PM

Wait how can i tell?
Im kinda new too btw Lol

Title: Re: How do i reset my Fade to infant?
Post by: Crewella on December 23, 2011, 05:44:08 PM

One of the simplest ways is by how he sings when you rub him under the chin a lot.  If he sounds like this he's running OS1.1 (or possibly OS2 already if you got him in the last year or so and it's possible a previous owner upgraded him):

http://www.youtube.com/watch?v=N7XC_4ftHc4

If he sounds more like a coyote howling it's older, probably OS1.0.2.

Hope that helps!  :)

Title: Re: How do i reset my Fade to infant?
Post by: hapihapidino on January 12, 2012, 11:47:41 PM

I don't think we can do it, it should require some kind of reset card which we can neither purchase or get anywhere. :(

Title: Re: How do i reset my Fade to infant?
Post by: PleoPet on January 13, 2012, 10:22:11 AM

> Oh and Btw when my Fade was a Hatchling he went Juvenile in about 40 mins

That usually means it is running OS/PM 1.1 (or earlier) for the UGOBE old model Pleos. It grows up very fast.
The PM2 update adds a much longer 'hatchling' phase.

If you want to, you can reset the OS/PM1.1 personality to newborn using an SD card and a special script (email me if interested).
However, it will only give you that 40 minute birthing experience again.

> Added:Do i have to update him to OS2?
Terminology is sometimes mixed up. PM2 and OS2 and sometimes used interchangeably.
If looking for something new, I agree with Crewella it is worth trying the PM2 update. It will give you a much longer hatchling experience, and new behaviors when it grows up.

On the Pleoworld website, only use the "PM2" upgrade in older UGOBE pleos:
   http://www.pleoworld.com/downloads/firmware.aspx
(DO NOT USE ON PLEO RB)