Bob the Pleo Forums

Pleo Stuff => Pleo Archives => Archive -- Technical Classic => Topic started by: Watergazer on April 03, 2010, 11:34:18 AM

Title: New Pleo...Should I update?
Post by: Watergazer on April 03, 2010, 11:34:18 AM

I should be getting my first Pleo this Wednesday. Do the new '09 Pleos already have the new 1.1 OS installed in them or do I have to do that myself? If so, should I go ahead and download that before hatching my Pleo for the first time or hatch him, raise him up a bit, then download a week or so down the line?

Title: Re: New Pleo...Should I update?
Post by: fancyfont on April 03, 2010, 08:15:10 PM

Everyone most likely would have a different answer, but it is very cute to see pleos in their original program. Some Pleos do have the update already in them. Some do not. They do if it is coming from Innvo Labs.  Anxious to know what your new little dino will have. :)

Title: Re: New Pleo...Should I update?
Post by: mweed on April 03, 2010, 10:14:12 PM

'09 from Innvo Labs will have LifeOS1.1

Title: Re: New Pleo...Should I update?
Post by: Watergazer on April 04, 2010, 07:34:20 AM

My Pleo is direct from Invvo...so probably will have it. Thanks!

Title: Re: New Pleo...Should I update?
Post by: RedwoodsMama on April 07, 2010, 01:05:39 PM

 Hi, make sure to record ( if at all possible) the hatching process, it is a wonderful experience. I was lucky in my view to have Nova be updated so I could personally see the difference between the old O.S. installed in Ugobe and the new one , 1.1. The latest one is better than the old one, but I still enjoyed seeing the changes Nova went through, and I still got to see her go through the birthing process with it. Good luck when Herbie arrives.
                                                  RedwoodsMama   and Nova