Print

[hujahu]

Hello,
could you please help me with my dead Pleo: When I switch him on, he doesn´t make any voice, he doesn´t make any motion ….  When I insert  SD card with Pleo Personalities (*.urf) he replays  the program correctly.
When I Connected him through  Dino-MITE v1.0.2 I´m able to change him into the storage position and I made this list from terminal monitor:

Dino-MITE v1.0.2 Terminal Monitor
>  <=== SENDING COMMAND ===>
stats power
                  Battery Voltage = 79, Min 79, Max 80 (tenths of a volt)
              Battery Temperature = 30, Min 30, Max 30 (degrees C)
                  Battery Current = 257, Min 257, Max 807 (milliamperes)
             Battery sensor value = 87 (% capacity remaining)
      Battery sensor direct value = 87, Min 0, Max 87
              Battery Voltage A/D = 707, Min 681, Max 709
          Battery Temperature A/D = 274, Min 236, Max 276
              Battery Current A/D = 36, Min 36, Max 113
            Thermistor Resistance = 8228, Min 7820, Max 8245 (ohms)
      Battery Internal Resistance = 545, Min 545, Max 545 (milliohms)
        Battery Capacity Consumed = 26 (mAh)
                       Powered up = true
                  RTK Adjustments = 0
                           RTK IK = 0
                           RTK VB = 0
Power monitor reset early warning = 0 (/LLO)
>
> <=== SENDING COMMAND ===>
time
h:m:s:ms 0:06:04.294, tms 364294
us: 362800672
>
> <=== SENDING COMMAND ===>
config
Pleo Hardware Configuration:
  Hardware ID: 07060B07-xxxxxxxx-01002708-FFFFF8FF (070F33F8)
  Serial Number: xxxxxxxxxx
  Board Revision: 17-8
  Board Revision ADC: 523
Build Configuration:
  Firmware built for: Pleo
  Build type: RELEASE
  Pleo main ARM version: 8128 - Mar 19 2008 06:24:52
  Pleo head ARM version: 8128 - Mar 19 2008 06:25:46
  Pleo PM (DF) version: 8139 - Mar 24 2008 20:32:32
  Bootloader version: 7361 - Nov 15 2007 21:34:31
  Compiled in:   Thumb mode
  Resource folders:  on
MotorController Configuration:
  MotorController 0: Version 28
  MotorController 1: Version 28
  MotorController 2: Version 28
  MotorController 3: Version 28
VM Configuration:
  Incremental mode:   off
  Code swapping:      false
  malloc mode:        false
  main vm image:      4096
  sensors vm image:   3072
  auxiliary vm image: 2560
  user vm image:      2048
>
> <=== SENDING COMMAND ===>
ls
---rw-x     1158 SYS_STATS.SSF
---rw-x       59 R_flag.txt
---rw-x     6581 pm_props
---rw-x        1 result.txt
---rw-x    33240 plogfile.dat
5 file(s) with total size 41039
 

Will you help me, please?

[mweed]

My first guess would be a corrupted default urf.

I am assuming based on the fact that it runs personalities, that you installed the LifeOS1.1.

The first question would be, did your pleo function before upgrading the OS?  And did it quit working immediately after upgrading?  If it did, then the upgrade failed.  This has happened to a number of people.  The suggestion is usually to re-download and re-install the upgrade.  Upgrading using the SD card seems to work better for this.

More information around when it quit working and what actions you have done would help diagnose the problem.

And as always, you can try contacting ugobe customer service.  They have additional resources to back-out an OS upgrade, and additional diagnostic aides.

[degers]

hujahu,
I would try updating your pleo to OS1.1 via the sd card method using the instructions provided.

If this does not work please contact support:  http://www.pleoworld.com/support/contact/

[hujahu]

Hallo, i cannot find anywere the LifeOS downgrade. Can you tell me where to download LifeOS 1.0.2 or send me a copy?

[hujahu]

This is the same problem:
http://andrey.mikhalchuk.com/2008/09/23/how-did-i-bricked-pleo-and-returned-it-back-to-life.html

[mweed]

I have the original 1.0.2 upgrade from 1.0 at home.  i can post it tonight if no one else does.  But the question is, is the the 1.0.2 downgrade offered by Ugobe tech support the same as the 1.0.2 upgrade that was originally released?  Does anyone have the downgrade from Ugobe?

[hujahu]

I have the original 1.0.2 upgrade from 1.0 at home.  i can post it tonight if no one else does.  But the question is, is the the 1.0.2 downgrade offered by Ugobe tech support the same as the 1.0.2 upgrade that was originally released?  Does anyone have the downgrade from Ugobe?

Could you please send me LifeOS 1.0.2 for downgrade....

[degers]

hujahu,
If you contact ugobe support http://www.pleoworld.com/support/contact/ they have a patch and instructions which should fix your problem.

[fancyfont]

Ugobe sent me an sd card with 1.0.2. is this what you are looking for? Not sure if this is different from the one that I wasn't able to download in the beginning.

[hujahu]

Ugobe sent me an sd card with 1.0.2. is this what you are looking for? Not sure if this is different from the one that I wasn't able to download in the beginning.

Yes, this is, what I need ... could you send it to me?

[degers]

hujahu, I really would recommend contacting ugobe first.  They have a patched version of 1.0.2 which is designed especially for fixing your problem.

[li54]

same problem here:

it would really be nice to upload the downgrade file ..  :
tnx

[grumpy]

I have added a topic with the links to download the LifeOS 1.0.2 upgrade.

You can try it, but I don't know if it will work to downgrade or not!

[li54]

thank you for the file. pleo is back.   

the win updater recognizes the os1.1 as unknown and installs the os1.0.2 without problems.
the "update" to os1.0.2 is at least 6 times faster than the next to os1.1.

[Junkroxy]

I tried varioous time but the SD mode didnt work

[fancyfont]

The SD mode in Penelopie doesn't work well either. She's unable to do the Xmas skit but can do the Love struck. Peeky and J.C  can do them all. Not sure if it's the slot or the SD card.

[Junkroxy]

I think the SD option lost some files, or not? uhm...
I saw old videos about pleos, i miss some things about the 1.0, aargh!