Print

Problems

5 (55.6%)

None

4 (44.4%)

Total Members Voted: 7

[Burberry016]

[InmemoryofRomeo]

I had a problem with Matilda (skin meltdown) and Lilo (software malfunction) however the first was extremely odd/rare and the second was caused by a faulty SD card.

[49er]

I've not had any problems with my pleos, knock on wood! *Raps hand against head* If anything, it's my pleos that have had problems with me.

[allosaurus]

Uh, it should be obvious for me.



IMR, whattaya mean by "skit meltdown?"

[InmemoryofRomeo]

There's pics under an old thread called 'Matilda has a bad hole', I'd look it up for you but its late and past my bedtime

[Burberry016]

Oh, I saw that picture that was the largest hole I'd ever seen.

[InmemoryofRomeo]

Ugobe said she had a bad batch of rubber when I made enquiries and indeed Lilo and Stitch have both had 'softer' rubber than Matilda's whose was quite hard. Of course I didn't know that when I got her having never had the pleasure of meeting another Pleo before then. (I picked mine up at 9am the day they were released so I think I had one of the first here in Aus )

[Burberry016]

That's cool!

[Darkwolf]

My problem is the battery. It seems to fail in giving the proper required juice to Pleo making Pleo believe it's empty and thus she falls asleep.
(Although I tried a new trick that seems successfull so far: use a full battery for 10 minutes in Pleo and then charge it again straight away. When done, so far the battery seems to hold up for a full charge without making Pleo fall asleep every 5 minutes.)