Print

[DinosaurGirl]

Hi, I'm having trouble installing the Pleo RB female firmaware.   I have a 2GB microSD card. There is absolutly nothing on it I just bought it. I tried to copy the files to put it on the SD file but it won't copy. Can someone please give me instructionson how to install it correctly?  ASAP please!


   ~Dino~ 

[kat]

You might need to format the card?  I'm not very techy on that front but that would be where I would start

[RedwoodsMama]

                  http://www.pleoworld.com.hk/pleo_rb/eng/firmware.php

         Kat is right, but if it is a brand new file, it should be ok, Erase everything on it, or re format, and then follow these instructions, it is very important to have a fully charged battery or it may not work. You also must be registered on this site to download this if you hav en't, but I would just print out the instructions and make sure you are doing it correctly.                 RWM

[DinosaurGirl]

Ok. Thank you VERY much! I will try that and if it doesn't work, I'll reply. Thanks!


   ~Dino~ 

[DinosaurGirl]

Ok, well, I already have a problem... (This is a bit embarassing) It says "The disk is write protective" I don't exactly know what it means...


   ~Dino~

[kat]

There may be a little tab or switch on your card that you move sideways to allow you to write to the card and then if you didn't want to be able to erase the stuff off the card you would move the switch back the other way.

[DinosaurGirl]

Yes! That's what it was! Thank you very much! (I'm happy can you tell?) Thank you. I will see if the download is successful when the battery is charged.


   ~Dino~ 

[kat]

Yay!  glad that's all it was    Good luck with the upgrade

[DinosaurGirl]

Haha thanks! 

 
~Dino~